产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

混合设备是粉体材料厂商主要设备之一

网址:www.hunliaoji.com.cn  2021-05-20  作者:admin    阅读:

混合设备是粉体材料厂商主要设备之一,以三元材料的加工生产为例,混合设备通常设置在配料设备与煅烧设备之间,为煅烧提供均匀的混合料。三元材料的混合是将计量比的锂盐和三元前驱体同时加入混合设备进行混合,一般分为干法混合和湿法混合,大部分三元材料厂采用干法混合,相较于湿法混合来说具有简单易行、能耗低等特点。
Mixing equipment is one of the main equipment of powder material manufacturers. Taking the processing and production of ternary materials as an example, mixing equipment is usually set between batching equipment and calcination equipment to provide uniform mixture for calcination. The mixing of ternary materials is to add the lithium salt and ternary precursor into the mixing equipment at the same time, which is generally divided into dry mixing and wet mixing. Most of the ternary material factories use dry mixing, which is simple and easy to operate and low energy consumption compared with wet mixing.
图片
picture
高速混合机
High speed mixer
三元材料常用的混合设备有高速混合机、球磨混合机等多种,而就这两种混合设备而言,高速混合机在很多方面优于球磨混合机,以体积为500L的高速混合机和体积为1500L的球磨机相比,具体实际生产参数对比如下文所示:
There are many kinds of mixing equipment commonly used for ternary materials, such as high-speed mixer, ball mill mixer, and so on. For these two kinds tuijian:dianzugui.37ix.com.cn www.dianzugui58.com www.jiedixiang58.com
www.hupomuju.cn www.zhenxinmoju.com www.tongdiaoniu.com.cn www.zhihongmuju.cnof mixing equipment, the high-speed mixer is better than the ball mill mixer in many aspects. Compared with the high-speed mixer with a volume of 500L and the ball mill with a volume of 1500L, the comparison of specific actual production parameters is as follows:

返回新闻

转让电话
13313028229